-40%

Walnut Powder Sand Blaster Carbon Deposition Engine Intake Valve Cleaning Machin

$ 211.19

Availability: 90 in stock
  • Vehicle Type: Passenger Vehicle
  • Features 1: External air source, built-in dust filter
  • OBD Interface: OBDII
  • Walnut powder diameter: should between 0.4-0.8mm
  • Supported System: Engine Intake Pipe Valve Tester
  • Type: Sand Blaster
  • Capacity: 2-4KG(4-9LB)
  • Features 2: Deep removal of carbon deposition, Integrated design
  • Country/Region of Manufacture: China
  • Condition: New
  • Warranty: 3 Year
  • Item Type: Walnut Sand Decarbonizing Machine
  • size: 520*520*890mm
  • Special Features: Car Engine Combustion System Clean
  • Brand: Autool
  • Application models: Applicable to all vehicle models
  • Power supply: 110V
  • Air pump pressure: should more than 0.7Mpa (7bar/102PSI)
  • Model Name: HTS558
  • Weight: 27kg
  • Vacuum suction: 0.02MPa

    Description

    What is carbon deposits?
    There are some hydrocarbon olefin residues attach on engine intake,cylinder when fuel burn in engine not completely. These residues change into hard black shell in high temperature condition , that called carbon deposits.
    Why need clean carbon deposits?
    Carbon depositswill decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...all the thing will hurt engine deeply. So normally we should clean carbon deposition after every 40000-50000 kilometer trip
    What is walnut material?
    It show high performance in the three area: hardness, anti-pressure, wear-resisting. A large amount of  pores on surface of  walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.
    It was hardly dissolved in acid, alkali and water.
    Walnut grit is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition, it will clean intake pipe and back side of intake valve thoroughly but no damage
    Car DE-Carbon Cleaning Experts
    Carbon deposits lead to engine idling instablity, insufficient air intake,power down,acceleration weakness. HTS558 helps you clean the carbon deposits effetively restoring your car to a healthy engine.
    It is a special machine for engine Intake pipe and intake valve back side clean. Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum. This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly.
    Deep Removal Of Carbon Deposits
    Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.
    It is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose CT150,CT200 or C100. Walnut powder not include in package,please get it in local market; High pressure air pump is requirement(not include in package); Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.
    Specifications
    Applications:All vehicle
    Rated Voltage:110V/220V
    Rated Frequency:50/60HZ
    Capacity:13L
    Rated Power:1200W
    Vacuum Suction:0.02MPa
    Air Flow:<300L/Min
    Package Dimensions:400*400*540MM
    Weight:10KG
    External Air Source
    Automotive Walnut powder engine Intake pipe valve clean machine enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
    External Air Source
    Automotive Walnut Sand DE-Carbon Cleaner enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
    Built-In Dust Filter
    Automotive Walnut Sand DE-Carbon Cleaner Machine can separate the recovered walnut sand grit from carbon deposits for recycling.
    How to use?
    1) Open the cover of AUTOOL HTS558 machine and pour into walnut powder (need 2-4KG ), then put dust guard on walnut powder and close.
    2) Connect blasting gun nozzle and recycling hose together (there is a hole on recycling hose)
    3) Remove intake manifold of the engine, plug blasting gun into the intake, and turn the crankshaft to close intake valve. Connect high-pressure air pump((not included)) to HTS558.
    4) Connect AC power, then start cleaning. The process should last 1-3 minutes(depending on how much carbon build-up)
    5) Close AUTOOL HTS558, check-up cleaning effect. Normally, the walnut powder can be reused 5-10 times(depending on how much carbon build-up)
    Recommend Reason :
    1 Air pump pressure should more than 0.7Mpa (7bar/102PSI)
    2 Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
    3 Cleaning time between 1-3 minutes
    Package include:
    1x AUTOOL HTS558 unit
    2x Spray gun
    1x Goggles
    1x Recycle hose
    1x Recycle hose and spray gun connector
    Walnut powder not include in package,please get it in local market
    High pressure air pump is requirement(not include in package)
    VISIT OUR STORE
    MORE PRODUCTS
    MORE PRODUCTS
    3 WARRANTY&SERVICE
    FIVE STAR FEEDBACK
    VISIT OUR STORE
    MORE PRODUCTS
    MORE PRODUCTS
    3 WARRANTY&SERVICE
    FIVE STAR FEEDBACK