Shock Nitrogen regulator w/ 8 ft stainless w/ no loss chuck 600 Psi Fox King Air

Description

**** The last two pictures are showing a regulator with 2 1/2 inch liquid filled oversized chrome gauges if you are interested in this add and send me a quick message, this is a upgrade and not included in the standard purchase*******
THIS WILL SHIP SAME DAY IF PURCHASED BEFORE 3 pm eastern
This is a high pressure nitrogen regulator for adjusting king, fox, or any other shock.  It comes with made in the USA nitrogen regulator with anti-shock covers for gauges, 6 1/2 feet of high pressure stainless hose and high pressure shut-off valve, a 600 psi gauge and then a 18” stainless hose and a Schrader valve no loss chuck
The Gauge allows accurate measurement, and regulation of shock pressure for most racing shocks which have a schrader fill valve.( same as a tire valve stem)  this chuck screws onto the shrader valve to accurately adjust pressures through the shock shrader valve. The tee handle opens and closes the center pin valve while it is attached to the valve stem so the pressure set is the pressure you get. You simply add nitrogen as needed through the brass schrader valve to get the pressure you want from your nitrogen tank.
Gauge reads 0-600psi.
The long hose allows you to make adjustments with your bottle sitting safely on the ground.  This kit is brand new and makes adjusting air shocks a breeze.   It's as simple as buy this kit, go to your local bottled gas supplier or welding shop and rent or buy a nitrogen bottle(pretty cheap).  Adjust the regulator to desired pressure and fill shocks, its that easy.  It allows you to simply get the best setup for any terrrain.
Gauges read bottle side 0-4000psi, regulator side 0-600psi.  My prices are the lowest !
CHECK MY OTHER AUCTIONS FOR MANY MORE SHOCK TOOLS! Posted with eBay Mobile
If you want 8 ft hose let me know only couple bucks more
I have this in high pressure rubber at a cheaper price
CHECK MY OTHER AUCTIONS FOR MANY OTHER SHOCK FILLING TOOLS!
I