-40%
Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino

Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino

$ 18.15

Availability: 46 in stock
  • Component power: ≤0.5W
  • Settling time: ≤60S
  • Brand: Unbranded
  • Package Contents: Module SET
  • Working current: 5-10mA
  • Condition: New
  • Heating voltage: 5±0.2V (AC DC)
  • Response time: ≤5S
  • Module size: 42mm×32mm×20mm
  • Operating temperature: -10-50°C

    Description

    Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
    DESCRIPTION
    Liquid PH 0-14 Value Detect Sensor Module + PH Electrode Probe BNC for Arduino
    feature:
    Ph0-14 value detection sensor module:
    Heating voltage: 5±0.2V (AC DC)
    Working current: 5-10mA
    Detectable concentration range: PH0-14
    Test temperature range: 0-80°C
    Response time: ≤5S
    Settling time: ≤60S
    Component power: ≤0.5W
    Operating temperature: -10-50°C (nominal temperature: 20°C)
    Humidity: 95% RH (nominal humidity: 65% RH)
    Module size: 42mm×32mm×20mm
    Output: analog voltage signal output
    With 4 M3 mounting holes
    PH Electrode Probe BNC:
    The pH electrode has a cylinder with BNC input terminals that can be directly connected to the input terminals of a pH meter, controller, or any pH device.
    pH electrode detectors are accurate and reliable, providing near-instantaneous readings.
    PH range: 0-14 PH
    Temperature range: 0-80°C
    0:7±0.25PH
    Alkaline pole 15 mv or less
    Theoretical percentage: 98%
    Internal resistance: ≦250 mΩ
    Response time: ≦ 1 minute
    Operating temperature: 0-60°C
    Terminal block: BNC plug
    BNC connectors fit most pH meters and controllers.
    Suitable for various applications: aquariums, ponds, laboratories, etc.
    Package Included:
    1 x Liquid PH0-14 Value Detection Test Sensor Module
    1 x pH Electrode Probe Hydroponic Sensor BNC Interface
    notes:
    1. Due to manual measurement, please allow 1-3mm error.
    2. Due to the difference of different monitors, the picture may not reflect the actual color of the item. Thanks!
    POLICES
    Shipping
    Payment
    WARRANTY
    We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
    Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
    It takes about 7-15 working days to Canada; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.