EVAP Smoke Machine Automotive Leak Detector Fuel Pipe System Diagnostic Tester

Description

AUTORY Automotive EVAP Smoke Machine Fuel Pipe System Leak Detector Tester Dual Mode
The is a professional tool for automotive pipeline leak detecti
on. Diagnostic Leak
Detectors can quickly locate hard-to-find leaks in any sealed system using a
visual smoke system, such as EVAP systems, air intake systems, exhaust
systems, air and water leaks, pressurized air coolers, turbochargers, pipes,
fittings, hoses and many other components. It helps technicians resolve issues
quickly and at once, reducing the cost of repeat vehicle returns, dramatically
reducing diagnostic time and improving customer service.
Features:
● Small and portable, sized to fit in a toolbox.
● Built-in air compressor, ready for diagnosis and maintenance at any time.
● Pressure display: leaks can be found by maintaining a certain pressure
value.
● Compact, lightweight design.
LARGE AMOUNT OF SMOKE
It has its own air pump, So it does not have to rely on other air machines.Connect the detector with DC12V battery, it can output lots of smoke within 30 seconds after turning on.
WIDE RANGE OF APPLICATIONS
For detecting the leakage of pipe systems on cars, motorcycles,snowmobiles,off- road vehicles, ATVs, light trucks and speedboats. Suitable for all car models.
AIR MODE--Adjustable Air Flow from 1 to 6: Air Flow meter with adjustable button, easy to observe and operate
SMOKE MODE--it can generate smoke in about 30 seconds, quickly help you detect if leak exist and how big the leakage is by the changes of the powerful pressure gauge.
OIL LEVEL METER: Oil level meter allow you to accurately control the test oil volume
OVERHEAT & ANTI-FROST PROTECTION
This smoke detector has an intelligent protector that automatically shuts off the power if the working limit is exceeded, for example over 75℃, to ensure the safety of the operator and the equipment.
Test oil: both liquid paraffin and baby oil are OK. However, please make
sure there is no water in it and no viscous liquids are allowed.
Operation steps
● Open the Engine cover and hook the detector to the front cover of the
engine.
● Open the access port of the system to be tested, and seal it with plugging
the standard tapered adapter. If the tested system has multiple open
accesses, please block them with corresponding rubber plugs.
● Connect to a standard tapered adaptor with a tapered quick coupling on
the smoke exit pipe of the tested device.
● Connect the detector with a DC12V battery: red clamp with positive
terminal, black clamp with negative terminal. Do not connect in the opposite
way.
● After the power supply is correctly connected, the equipped air pump will
start to work and output smoke.
● If there is no leakage in the tested system, the pressure gauge reading can
reach more than 15PSI. But if the reading is low and fluctuates continuously,
there is a leak.
● Turn on the power switch of the detector, the detector will output smoke at
speed of 6L/min to the inside of the tested system. Soon the pipe will be filled
with large amount of smoke. The leak point will leak smoke outward. In order
to improve the detection effect, a bright light can be used.
● After finishing the detection, please put away the cables, smoke duct
pipeline, and related accessories.
Safety precautions:
● To avoid short circuit, do not immerse the product in water or other liquids.
● Please use the standard voltage and power cord.
● When not using this product, do not expose it to strong light or high
temperature.
● When performing leak detection, stay away from smoke-sensitive parts
such as headlights.
● When for the first time using this detector , please add 10-20 ml oil and do
not exceed this range.
● Change the test oil regularly. Pour out any left oil in the detector before
refilling with new oil.
Package Listing :
1pc * Car Smoke Leak Detector Main Unit
1pc * Hook (with hand-tighten nuts)
1pc * Rubber Connect Parts
1sets * Hard Rubber Hose Plug (with serial specification)
1sets * Soft Rubber Hose Plug (with serial specification)
1pc * Standard Cone Adapter
1pc * Universal Airbag Adapter
1pc * Power Cord Clamp
1pc * Valve Core Wrench
1pc * Test Oil Refill Bottle(oil not included)
1pc * EVAP Special Connector
1pc * Smoke Hose
1pc * User Manual