-40%
4LE11 1/2 HP Submersible Effluent Pump 230V 2

4LE11 1/2 HP Submersible Effluent Pump 230V 2" NPT Discharge Cast Iron

$ 246.61

Availability: 100 in stock
  • Impeller Material: Polypropylene
  • Brand: DAYTON
  • Base Material: Cast Iron
  • HP: 1/2
  • Top Material: Cast Iron
  • Condition: Open box. Packaging in distressed condition, pump unaffected.
  • All returns accepted: Returns Accepted
  • GPM of Water @ 25 Ft. of Head: 65
  • GPM of Water @ 10 Ft. of Head: 92
  • Motor RPM: 3450
  • Height: 17-5/16"
  • Switch Type: None
  • Duty: Intermittent
  • GPM of Water @ 5 Ft. of Head: 96
  • MPN: 4LE11
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • GPM of Water @ 15 Ft. of Head: 84
  • Item: Submersible Effluent Pump
  • Phase: 1
  • Motor Type: Oil Filled PSC
  • Shaft Seal: Silicon Carbide
  • Bearing Type: Ball
  • Housing Material: Cast Iron
  • GPM of Water @ 30 Ft. of Head: 53
  • GPM of Water @ 40 Ft. of Head: 20
  • GPM of Water @ 20 Ft. of Head: 76
  • Cord Length: 20"

    Description

    Submersible Effluent Pump
    SPECS
    Dayton submersible ejectors are self-contained and recommended for use in a sump or basin, where they should be vented in accordance with local plumbing codes. They are designed to pump effluent or wastewater, nonexplosive and noncorrosive liquids, and shall not be installed in locations classified as hazardous in accordance with the United Stated Electrical Code (NEC), ANSI/NFPA 70. Never install the pump in a trench, ditch, or hole with a dirt bottom; the legs will sink into the dirt and suction will become plugged.